Label Splicers

Reel-to-Reel Label Splicing Packages

RRS-8-12These Turnkey Label Splicing Packages allow you to splice one roll of labels to another in order to make a larger roll from two smaller rolls, or to change label types during a production run.

An 8″ wide Splicing Table accepts label widths from 1/2″ to 8″. Pre-set the Counter to stop the system when the desired count is reached.

These Label Splicing Packages are bi-directional, virtually silent in operation, and run at speeds up to 50″ per second.

8″ wide complete “OFF-LINE” Splicing Package

  • Key Features and Benefits
  • 8” wide Splicing Table accepts all label widths from 1/2” to 8”.
  • Pre-set 6-digit Counter stops system when desired count is reached.
  • Fully Bi-Directional operation controlled from a single Control Panel.
  • Dual Label Sensors for left-to-right or right-to-left Counter operation.
  • Speed up to 240-ips (6096-mm) for fast label handling.
  • Premium quality 3” “Quick-Chuck” Core Chucks for maximum convenience and efficiency.
  • Outer Label Flanges included to guide outer edge of Label Roll. (not shown in photo).
  • Convenient Splicing Tape Roll Holder right on the Splicing Table.
  • Extra Roll Holder in case “Alert Labels” are used to alert users that the labels are about to change.
  • Universal worldwide Power Supply is UL, CUL, & CE rated / certified for 100-240V 50-60Hz operation.
  • Under and over Label Rollers with Guide Rings insure smooth label transport over the Splicing Platen.
  • Stainless Steel Splicing Platen has precision Knife Grooves milled at 80º and 90º to Label Path.
  • Full-width drop-down Clamping Bars hold Labels on Platen during the splicing operation.
  • This product is backed by LABELMATE USA’s full 3-Year Parts and Labor Limited Warranty.
 MAX ROLL DIAMETER
LABEL WIDTH

LABEL SPLICING PACKAGES
RRS81212” (304mm)
1/2” to 8”Two CAT-3-CHUCK Motor Drive Units, with 3” diameter, 8.6” wide “Quick-Chuck” quick-locking Core Chucks and two Label Flanges.
Convenient Control Panel controls both Drive Units’ Torque and Direction for ultimate control over speed and Rewind Tension.
Pre-set 6-digit Counter (for opaque labels only) with Counter Reset Button on Panel.
Splicing Tape Roll Holder for 1” or 2” wide tape on 3” Core.
Two Adjustable Locking Bars with hardware lock the Splicing Table and the Drive Units into perfect alignment.
RRS121616" (406mm)1/2” to 8”The RRS-8-16 is identical to the RRS-8-12 except that the Unwinders/ Rewinders have a 16” Roll Diameter capacity.

 

Facebooktwittergoogle_pluslinkedinmail