Dispensers and Applicators

dispensers

 

Pacific Barcode’s full line of manual and automatic dispensers and applicators provides consistent and accurate labeling solutions to a wide variety of applications and materials.

Dispensa-Matic  DML Manual Dispenser

DMLConvenient, Easy to use, Durable, and Economical are a few of the words used to describe our new line of manual dispensers, the DML series.

The DML 450: This dispenser is able to use up to a 6.5″ diameter roll of labels, and is able to go to widths of 4.5″.

The DML 850: This dispenser is able to use up to a 6.5″ diameter roll of labels, and is able to go to widths of 8.5″.

The DML 1250: This dispenser is able to use up to a 6.5″ diameter roll of labels, and is able to go to widths of 12.5″.

  • All DML’s are able to mount on the wall
  • Manual multi roll label dispenser. Dispense any number of different rolls of labels independently up to the maximum width of the machine.
  • COMPATIBILITY: Butt cut, or die cut. Mylar, foil, holographic, transparent, or any other thin label stock.
  • Label boxes, envelopes, brochures, bottles, bags, cans, or anything that needs a label.
  • If repair is ever needed the manufacturer offers a 1-Day turn-around
  • MDL is always In-Stock and ready to ship

Dispensa-Matic Simple Simon  Manual Label Dispenser

SIMPLE SIMONSimple-Simon Manual Label Dispensers: Are precision, heavy-duty manual label dispensers for labels from 3/8″-4″ widths on Simple Simon 4″ and  from 3/8″ – 6 3/4″ widths to any length. Simply pull on the tab to dispense the label.

Two widths are available:

Simple Simon 4″: designed for labels up to 4″ in width

Simple Simon-W: designed for labels up to 6-3/4″ width

  • Manual multi roll label dispenser. Dispense any number of different rolls of labels independently up to the maximum width of the machine.
  • COMPATIBILITY: Butt cut, or die cut. Mylar, foil, holographic, transparent, or any other thin label stock.
  • Label boxes, envelopes, brochures, bottles, bags, cans, or anything that needs a label.
  • Simple-Simon is an original design from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!
  • If repair is ever needed we offer a 1-Day turn-around
  • Simple-Simon is always In-Stock and ready to ship

Product Details:

We use very few outside sources for our machine components.

  • Side frames: made using the highest quality metals then formed, countersunk, de burred, and inspected one at a time at our facility.
  • Dispensing Tables: formed out of drawing quality Steel. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action) Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate.

LabelMate LD-100 Series Dispensers - 4.5" Wide

LD-100-U-SS_001LABELMATE USA Label Dispensers are a quick and easy way to dispense individual labels. They use a Peel and Present design, meaning that as the material passes through the Dispenser the label is peeled away from the backing material and presented at the front of the unit where it waits to be picked up by the operator. With several different models to choose from these Label Dispensers can handle virtually any job you may have for them.

With an unmatched 3-Year Parts and Labor Limited Warranty, all LABELMATE USA Dispensers are designed for worry-free 24/7 operation.

LABELMATE USA Dispensers are easy to set up and are virtually silent in operation.


LabelMate LD-100 Series Dispensers - 6.5" Wide

6.5” wide Reflective Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label.

  • Label Width – 6.5” (165-mm)
  • Roll Diameter – 8.6” (220-mm)

Dispensa-Matic U-25 Label Dispenser

Dispensa-Matic U-25 Label DispenserDispensa-Matic U-25 Label Dispenser: Is a simple heavy-duty semi-automatic electric label dispenser that is designed for labels from 3/8 of an inch to 2.5 inch widths to any length tall. This label dispenser advances at over 4″ per second. U-25 allows you to peel small labels with ease.

Dispensa-Matic Label Dispensers now have 2 options for sensing labels.  The standard option is a photo detector that detects the label by “seeing” it from .5″ to 1.5″ away.  This method works for most labels, even transparent ones.  The other option is a brand new design, another Dispensa-Matic patented Original from Richard Shannon!  It is an optical sensor with physical detector, allowing even the thinnest transparent labels to be sensed with ease.  This sensor will operate with less than 2 grams of force (one fourth the force of the previous micro-switch), but tested to last for over 2 million labels!

  • Two types of label sensing options, Photo Eye Detector, and Physical Detector
  •     Butt cut, or die cut compatible!
  •     Multiple row compatible.
  •     Semi-Automatic dispenser, pick, apply, and repeat.
  •     Label Circuit boards, PCBs, small bottles, bags, ICs, or anything that needs a small label.
  •     Full 3 Year warranty, including parts and labor.
  •     If repair is ever needed the manufacturer offers a 1-Day turn-around!

Side frames: made using the highest quality metals then formed, countersunk, de burred, and inspected one at a time at our facility.

Dispensing Tables: formed out of stainless. The peel edge is hand shaped to spec by our 20+ year machinist to get that perfect peeling edge needed to dispense labels without tearing the backing paper.  Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate. (We do NOT use cheap teflon tape that will peel off over time!)

The U-25 motor: is a shaded pole AC motor, and is also made in the USA.

Dispensa-Matic U-25 is an original design: from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!

International compatibility: We use motor specifically for Europe and all other 220V 50/60hz

Dimensions: 8″x8″x8″, Weight 7 Lbs.

Dispensa-Matic U-45 Label Dispenser

Dispensa-Matic U-45 Label DispenserDispensa-Matic U-45 Label Dispenser: Is a simple heavy-duty semi-automatic electric label dispenser that is designed for labels from 3/8 of an inch to 4 and 1/2 inch widths to any length tall. This label dispenser advances at over 5″ per second Standard Speed, and 11″ per second High Speed. U-45 allows you to peel small labels with ease.

Dispensa-Matic Label Dispensers now have 2 options for sensing labels.  The standard option is a photo detector that detects the label by “seeing” it from .5″ to 1.5″ away.  This method works for most labels, even transparent ones.  The other option is a brand new design, another Dispensa-Matic patented Original from Richard Shannon!  It is an optical sensor with physical detector, allowing even the thinnest transparent labels to be sensed with ease.  This sensor will operate with less than 2 grams of force (one fourth the force of the previous micro-switch), but tested to last for over 2 million labels!

MADE IN USA | 3 Year Warranty!

  • Two speed options available: High speed produces labels at 11″ per second verses Standard speed at 5″ per second
  •     Two types of label sensing options, Photo Eye Detector, and Physical Detector
  •     Butt cut, or die cut compatible!
  •     Multiple row compatible.
  •     Semi-Automatic dispenser, pick, apply, and repeat.
  •     Label Circuit boards, PCBs, small bottles, bags, ICs, or anything that needs a small label.
  •     Full 3 Year warranty, including parts and labor.
  •     If repair is ever needed we offer a 1-Day turn-around!

Dispensa-Matic U-45 is always In-Stock and ready to ship

ide frames: made using the highest quality metals then formed, countersunk, de-burred, and inspected one at a time at our facility.

Dispensing Tables: formed out of stainless. The peel edge is hand shaped to spec by our 20+ year machinist to get that perfect peeling edge needed to dispense labels without tearing the backing paper.  Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate. (We do NOT use cheap teflon tape that will peel off over time!)

The U-45 motor: is a shaded pole AC motor, and is also made in the USA to our specifications. (No CHEAP 12v motors here!)

Dispensa-Matic U-45 is an original design: from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!

International compatibility: We use motor specifically for Europe and all other 220V 50/60hz, (no cheap 12v DC motors here)

Dimensions: 11″x11″x8″, weight 11 Lbs


Dispensa-Matic U-60

Dispensa-Matic U-60Dispensa-Matic U-60 Label Dispenser: Is a simple heavy-duty semi-automatic electric label dispenser that is designed for labels from 3/8 of an inch to 6-inch widths to any length tall. This label dispenser advances at over 7″ per second standard.

Dispensa-Matic Label Dispensers now have 2 options for sensing labels.  The standard option is a photodetector that detects the label by “seeing” it from .5″ to 1.5″ away.  This method works for most labels, even transparent ones.  The other option is a brand new design, another Dispensa-Matic patented Original from Richard Shannon!  It is an optical sensor with a physical detector, allowing even the thinnest transparent labels to be sensed with ease.  This sensor will operate with less than 2 grams of force (one-fourth the force of the previous micro-switch), but tested to last for over 2 million labels!

Product Details

Side frames: made using the highest quality metals then formed, countersunk, de-burred, and inspected one at a time at our facility.

Dispensing Tables: formed out of aircraft grade Aluminum. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action)  Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate. (We do NOT use cheap teflon tape that will peel off over time!)

The U-60 motor: is a shaded pole AC motor, and is also made in the USA to our specifications. (No CHEAP 12v motors here!)

Dispensa-Matic U-60 is an original design: from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!

International compatibility: We use motor specifically for Europe and all other 220V 50/60hz, (no cheap 12v DC motors here)


Dispensa-Matic DM-II Label Dispenser

Dispensa-Matic DM-II Label DispenserDispensa-Matic DM-II Label Dispensers: are heavy-duty semi-automatic electric label dispenser for labels from 2″-15″ widths x any length. These label dispensers advance at over 6″ per second. DM-II machines are specifically designed not to wind up waste paper. This allows the user to dispense rolls up to 15″ Diameter (large roll adapter) without changing the waste! Loading is a “snap”, just feed the labels between the dispensing tables then through the patented feed-roll assembly and “snap” into place.

Dispensa-Matic Label Dispensers now have 2 options for sensing labels.  The standard option is a photodetector that detects the label by “seeing” it from .5″ to 1.5″ away.  This method works for most labels, even transparent ones.  The other option is a brand new design, another Dispensa-Matic patented Original from Richard Shannon!  It is an optical sensor with physical detector, allowing even the thinnest transparent labels to be sensed with ease.  This sensor will operate with less than 2 grams of force (one fourth the force of the previous micro-switch), but tested to last for over 2 million labels!

MADE IN USA | 3 Year Warranty!

The DM-II comes in three different sizes!

  •     The “6-II” is designed for labels that are from 2″ in width to 5.5″
  •     The “10-II” is designed for labels that are from 2″ in width to 9.5″
  •     The “16-II” is designed for labels that are from 2″ in width to 15.5″

All DM-II are:

  •     Best for roll or fan-fold labels
  •     Best for large diameter rolls, and where constant speed is needed
  •     Does not wind up waste
  •     Two types of label sensing options, Photo Eye Detector, and Physical Detector
  •     Butt cut, or die cut compatible!
  •     Semi-Automatic dispenser, pick, apply, and repeat.
  •     Label Circuit boards, PCBs, small bottles, bags, ICs, or anything that needs a small label.
  •     Full 3 Year warranty, including parts and labor

Product Details:

Side frames: made using the highest quality metals then formed, countersunk, deburred, and inspected one at a time at our facility.

Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action) Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate. (We do NOT use cheap teflon tape that will peel off over time!)

The DM-II motor: is a shaded pole AC motor, and is also made in the USA to our specifications. (No CHEAP 12v motors here!)

Dispensa-Matic DM-II is an original design: from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!

International compatibility: We use motor specifically for Europe and all other 220V 50/60hz, (no cheap 12v DC motors here)

Need a custom label dispenser?  Call us for a quote!


Dispensa-Matic Flex-Matic

Dispensa-Matic Flex-MaticFlex+Matic label applicator enables the user to label all kinds of flat objects by simply setting the desired spacing using the digital readout and guides. Then insert the flat object. Once the object is inserted the label is applied automatically. Now, Insert the next one, as fast as you feed the machine, it will label! Bags, envelopes, pouches, PCBs, and even slimline CD/DVD cases. With our 5″ per second feed, most objects are labeled in less than 2 seconds! This allows the user to quickly insert another to start the procedure again. Once a rhythm is established objects are labeled VERY quickly. Loading is a “snap”, just feed the labels between the dispensing tables then through the patented feed-roll assembly and “snap” into place.

The Flex-Matic has a 14″ width space to label your flat object! This applicator can label any flat object fast and accurately up to 1/4″ thin at speeds up to 1,200 pieces per hour!

MADE IN USA | 3 Year Warranty!

SATISFACTION GUARANTEED. If we cannot make you happy within 21 days, send it back. *1.

  • Label objects up to 1/4″ thick! From an envelope to a CD/DVD case, with the CD/DVD inside! You can even use it to seal a CD/DVD inside the envelope!
  • Position adjustment is quick and easy, set the digital display to the desired vertical position, and set the guides to the desired horizontal position in inches to one10th of an inch.
  • ACCURATE! Can hold repetitive vertical positioning to 1/16″ or less on most objects. Holds 1/64th” horizontal accuracy on most objects.
  • Label objects to 14″ width.
  • Able to handle most plastic bags without difficulty.
  • Labels over 1200 pcs per hour with average dexterity. (more if you have a fast employee)
  • Costs are a fraction of similar machines of the same build quality.
  • Photodector activated, will work on all kinds of labels.
  • We designed and manufacture the Flex+Matic, so we are able to do any modifications necessary for those hard to label objects, but labels most objects without modification

In house manufacturing, you know you will get support when you buy Dispensa-Matic.

Dispensa-Matic Flex+Matic is always In-Stock and ready to ship

Product Details:

  • Side frames: Laser-Cut from the drawing quality steel then formed, countersunk, de burred, and inspected one at a time at our facility.
  • Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action) Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate.
  • Motors: The Flex+Matic uses DUAL motors that are shaded pole AC, and made in the USA to our specifications. (No CHEAP 12v motors here!)

Bottle-Matic

bottlematicThe Bottle-Matic Label Applicator enables the user to label all kinds of cylindrical objects by simply inserting the container and pressing a foot switch. Once the foot switch is activated the label is applied at over 4.5″ per second, most water bottles are labeled in less than 2 seconds! This allows the user to quickly remove the bottle and insert another to start the procedure again.  Once a rhythm is established bottles are labeled VERY quickly. The Bottle-Matic can label products at speeds of 1200 Pieces an hour!

MADE IN USA | 3 Year Warranty!

There are 2 available models for the Bottle-Matic

Single Label Bottle-Matic: This model applies a single label to your cylindrical container.Front and Back Bottle-Matic: This model applies both a front and back label to your cylindrical container

The Bottle-Matic has 2 size options

  • The Bottle-Matic 10″: is designed for cylindrical items from .5″ – 6″ in diameter, and from 2″ – 9″ in container height.
  • The Bottle-Matic 16″:  is designed for cylindrical items from .5″ – 6″ in diameter, and from 2″ – 15″ in container height

Additional Add-Ons

  • Waste-Rewinder: This option automatically rewinds the waste paper that is produced after labeling your product. Without this attached the waste paper would simple fall over the back of the machine and into a waste bin.
  • Auto-Matic:This labeling option allows you to just insert your bottle and the labeler automatically activates.
  • Foot switch is still included, but not needed!

Product Details:

  • SATISFACTION GARANTEED. If we cannot make you happy within 21 days, send it back.
  • Label objects from .5″ to 6″ diameter. From a Test Tube to a 1.5 gallon bottle .
  • ACCURATE: Holds 1/64th” side-side accuracy on most containers.
  • Label cylinders to 15″ length (or longer if the item has a neck)
  • Able to handle most tapered containers by simply adjusting the idle roller position.
  • Labels over 1200 pcs per hour with average dexterity. (more if you have a fast employee)
  • Costs are a fraction of similar machines of the same build quality.
  • Micro-Switch activated, will work on all kinds of labels.

Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within .001″ using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action)  Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate.
Motors: Bottle-Matic uses DUAL AC shaded pole gear motors, made in the USA.


Bottlemate-712M Label Applicator

  • Manual Label Applicator for Cylindrical Containers
  • Bottlemate-712MMedia width up to 7″ (178 mm)
  • Container Diameters from 0.3″ – 12″ (7.5 mm – 305 mm)
  • Maximum Label Length 37″ (940 mm)
  • Maximum Supply Roll Diameter 12″ (305 mm)

BOTTLEMATE Label Applicators provide an efficient way to uniformly apply labels to cylindrical containers

If you are looking for a simple and versatile solution for applying labels to bottles, cans, jars or other cylindrical containers but you don’t want to spend a fortune, look no further! BOTTLEMATE by LABELMATE is the Label Applicator you need! With both Automatic and Manual options to choose from, there is sure to be a BOTTLEMATE that is right for you! Our BOTTLEMATE Label Applicators are constructed of heavy-duty steel and other industrial grade materials and will withstand the highest volume production environments. Backed by LABELMATE’S unparalleled 3-year parts and labor limited warranty, these units are built to last. Choose BOTTLEMATE by Labelmate for convenience and reliability at an industry-leading low price!


Bottlemate-910P Automatic Label Applicator

Bottlemate910PAutomatic Label Applicator for Cylindrical Containers

  • Automatically applies one label
  • Media width up to 9″ (228 mm)
  • Container Diameters from 0.5″ – 6″ (13 mm – 153 mm)
  • Maximum Label Length 18.5″ (470 mm)
  • Maximum Supply Roll Diameter 10″ (254 mm)

Bottlemate-910P-2 Automatic Label Applicator

  • Automatically applies either one or two labels
  • Media width up to 9″ (228 mm)
  • Container Diameters from 0.5″ – 6″ (13 mm – 153 mm)
  • Maximum Label Length 18.5″ (470 mm)
  • Maximum Supply Roll Diameter 10″ (254 mm)

BOTTLEMATE Label Applicators provide an efficient way to uniformly apply labels to cylindrical containers

If you are looking for a simple and versatile solution for applying labels to bottles, cans, jars or other cylindrical containers but you don’t want to spend a fortune, look no further! BOTTLEMATE by LABELMATE is the Label Applicator you need! With both Automatic and Manual options to choose from, there is sure to be a BOTTLEMATE that is right for you! Our BOTTLEMATE Label Applicators are constructed of heavy-duty steel and other industrial grade materials and will withstand the most high volume production environments. Backed by LABELMATE'S unparalleled 3 year parts and labor limited warranty, these units are built to last. Choose BOTTLEMATE by Labelmate for convenience and reliability at an industry-leading low price!


Bottlemate-1510P Label Applicator

1510PAutomatic Label Applicator for Cylindrical Containers

  • Automatically applies one label
  • Media width up to 15″ (381 mm)
  • Container Diameters from 0.5″ – 6″ (13 mm – 153 mm)
  • Maximum Label Length 18.5″ (470 mm)
  • Maximum Supply Roll Diameter 10″ (254 mm)


1510PBottlemate-1510P-2 Label Applicator

Automattic Label Applicator for Cylindrical Containers

  • Automatically applies either one or two labels
  • Media width up to 15″ (381 mm)
  • Container Diameters from 0.5″ – 6″ (13 mm – 153 mm)
  • Maximum Label Length 18.5″ (470 mm)
  • Maximum Supply Roll Diameter 10″ (254 mm)

BOTTLEMATE Label Applicators provide an efficient way to uniformly apply labels to cylindrical containers

 

Facebooktwittergoogle_pluslinkedinmail