Dual Spindle Label Rewinder / Unwinder

The world’s easiest solution for wind-in / wind-out, label reversing & inspection applications. 

WIN-CAT-3 shown with optional Inspection Fixture and Counter
WIN-CAT-3 shown with optional Inspection Fixture and Counter

The Dual Spindle TWIN-CAT-3 Label Rewinder/Unwinder is a fast and easy way to change the direction of wound label material, make a larger roll out of several smaller ones. There is an Inspection Station option for visual inspection of printed labels. Counting options are also available. With various label widths and core diameters along with Inspection and Counting options, this all in one Rewind/Unwind Station is the ideal solution for that small roll diameter material you are working with.

  • Unwind and Rewind labels on one machine.
  • Ideal for “wind-in / wind-out” operations. Each spindle can rewind or unwind. You control the direction and torque on each spindle independently.
  • Reverse the order of serialized labels. Conveniently rewind labels onto a different core size.
  • Wind small rolls of labels from larger ones. Strip unwanted matrix from die-cut labels for easy disposal as you rewind them.
  • Your choice of Core Holders gives you maximum versatility.
  • Each Spindle allows roll diameters up to 8.6” (220-mm).
  • Add the Label Inspection option to create a stand-alone Inspection Station.
  • Then, add a Label Counter to create an all-in-one Inspection and Counting Station.
  • Set up an in-line slitting operation with a LABELMATE Slitter at your printer output.
  • An External Halt Jack allows you to STOP and START with the optional Foot Switch, optional Preset Label Counter or other external switch / device.
  • Maximum Speed: up to 175-inches per second (4445-mm). Worldwide, heavy-duty universal Power Supply included.

With an unmatched 5-Year Parts and Labor Limited Warranty, all LABELMATE USA Rewinders and Unwinders are designed for worry-free 24/7 operation.

Select your two Core Holders from the list below.– Mix or Match (except ACH-TC3).
CORE HOLDER TYPECORE DIAMETERMAXIMUM WIDTH# OF FLANGESORDER NUMBER
CorelessN/A6” (152-mm) 2SHAFT, TC-CL
Fin-Style1" (25.4-mm)6” (152-mm) 2SHAFT, TC-1"
Fin-Style3" (76-mm)6” (152-mm) 2SHAFT, TC-W6
Fin-Style3" (76-mm)10” (254-mm)2SHAFT, TC-W10
Continuously Adjustable1" to 4" (25-mm to 101-mm)6” (152-mm) 1ACH-TC3 Cannot mix
“Quick-Chuck” Quick-locking Core Chuck 1.5" (38.1-mm)6.7” (170-mm)1TC-C1.5-170
“Quick-Chuck” Quick-locking Core Chuck 1.5" (38.1-mm)10.6” (270-mm)1TC-C1.5-270
“Quick-Chuck” Quick-locking Core Chuck 1.57" (40-mm)6.7” (170-mm)1TC-C40-170
“Quick-Chuck” Quick-locking Core Chuck 3” (76-mm)6.7” (170-mm)2TC-C76-170
“Quick-Chuck” Quick-locking Core Chuck 3” (76-mm)8.6” (220-mm)2TC-C76-220
“Quick-Chuck” Quick-locking Core Chuck 3” (76-mm)10.6” (270-mm)2TC-C76-270
“Quick-Chuck” Quick-locking Core Chuck 4" (102-mm)6.7” (170-mm) 1TC-C100-170
OPTIONAL: Dual Control Low-Torque Option for delicate label webs.LTO-TC3
Base footprint: 7” x 15”.
*The ACH-TC3 cannot be mixed with any other type of Core Holder. The ACH-TC3 is not suitable for slitting
Accessories

   
TC-C76-27010” wide “Quick-Chuck” Shaft, with 2 Label Flanges.Core Diameter – 3”,
Label Width – 10.6” (270-mm),
Roll Diameter – 8.6” (220-mm)
TC-C76-2208.6” wide “Quick-Chuck” Shaft, with 2 Label Flanges.Core Diameter – 3”,
Label Width – 8.6” (220-mm),
Roll Diameter – 8.6” (220-mm
TC-C76-1706” wide “Quick-Chuck” Shaft, with 2 Label Flanges.Core Diameter – 3”, Label Width– 6.7” (170-mm), Roll Diameter – 8.6” (220-mm)
TC-C100-1706” wide “Quick-Chuck” Shaft, with Inner Flange.Core Diameter – 4”,
Label Width – 6.7” (170-mm),
Roll Diameter – 8.6” (220-mm)
TC-C1.5-1706” wide “Quick-Chuck” Shaft, with Inner Flange.Core Diameter – 1.5”
Label Width – 6.7” (170-mm),
Roll Diameter – 8.6” (220-mm)
ADAPT-326Pair of Adapters allow users of 6″ inside diameter Core on a 3″ diameter CAT-3-CHUCK.
FIN-SET-31mmReplacement 3” Core adapters for the MC-10AAllows for 3” Core Rewinding on the MC-10A. Set of 3 with hardware.
ACH-CATOptional 6” wide Adjustable Core Holder Upgrade for 1” to 4” coresUse in place of a QUICK-CHUCK or the STANDARD Shaft.
TC-C40-1706” wide “Quick-Chuck” Shaft, with Inner Flange.Core Diameter – 40mm
Label Width – 6.7” (170-mm)
Roll Diameter – 8.6” (220-mm)
TC-C1.5-27010” wide “Quick-Chuck” Shaft, with Inner Flange.Core Diameter – 1.5”
Label Width – 10.6” (270-mm)
Roll Diameter – 8.6” (220-mm)
SHAFT,-TC-11” Rewind Shaft, with 2 Label Flanges.Core Diameter – 1”
Label Width – 6” (152-mm)
Roll Diameter – 8.6” (220-mm)
SHAFT,-TC-CLCoreless Rewind Shaft, with 2 Label Flanges and Rewind Bail.Core Diameter – Coreless
Label Width – 6” (152-mm)
Roll Diameter – 8.6” (220-mm)
SHAFT,-CAT-STD6” wide Standard fin-style Rewind Shaft.Core Diameter – 3″ (76-mm)
Label Width – 6” (152-mm)
Roll Diameter – 12” (304-mm)
SHAFT,-CAT-W1010” wide standard fin-style Rewind Shaft.Core Diameter – 3″ (76-mm)
Label Width – 10” (254-mm)
Roll Diameter – 12” (304-mm)
INSP-6Optional 6” wide Inspection StationFor visual or manual scanning of labels as they are being wound.
INSP-8Optional 8” wide Inspection StationFor visual or manual scanning of labels as they are being wound.
INSP-10Optional 10” wide Inspection StationFor visual or manual scanning of labels as they are being wound.
PC-1Optional Preset Counter for counting labels.External Halt cable included to allow Rewinder to shut down when desired Preset count is reached.
Must order a “INSP” when ordering this option.
FOOTSWITCHOptional Foot SwitchAllows for easy start/stop of the TWIN-CAT with just a press of the Switch.

 

Facebooktwittergoogle_pluslinkedinmail